92
Lab Closed feature, Continued
Procedure
(continued)
Step Action
4
• Place a piece of tubing between a valve on the bottom of the
Reservoir and a sink or drain.
• Open the valve.
NOTE:
Do not place the tubing directly into a drain. This helps to
minimise bacterial contamination.
Closing tank
valve
Follow the steps below to exit LAB CLOSED Mode.
Step Action Diagram
1 The Milli-Q System is in Lab
Closed Mode.
2
• Go to STANDBY Mode.
• The Milli-Q System exits
LAB CLOSED Mode.
3 Go to READY Mode.
To Next Page
Loading...
