— i —
FOREWORD
Congratulations on your purchase of a “CF-Pro Series” of reciprocal flat bed cutting plotter.
This Instruction Manual is intended for RC model and RT model under the “CF-Pro Series.”
Any function for which no head name is designated is common to all models.
Please read and fully understand this Instruction Manual before putting the machine into service.
It is also necessary to keep this Instruction Manual on hand.
• This device uses blades and is extremely dangerous while it is operating. Absolutely
never bring your hands or head near the head as doing so may result in cut fingers,
etc.
NOTES
• Make arrangements to deliver this Instruction Manual to the person in charge of the operation of
this device.
• This Instruction Manual has been carefully prepared for your easy understanding, however, please
do not hesitate to contact a distributor or our office in your country if you have any questions.
• Description contained in this Instruction Manual are subject to change without notice.
• In the case where this Instruction Manual should be illegible due to destruction by fire or break-
age, purchase another copy of the Instruction Manual from our office.
To Next Page
Loading...
Need help?
General
