MIMAKI CF-0912 User Manual

— 2.51 —
Interruption of processing [DATA CLEAR]
Received data is cleared from the data receiving buffer.
Date described below can be cleared.
(1) Processing has been interrupted. But, it is desired to abort the processing.
(2) It is desired to clear data that has been already received but not yet processed.
(3) In prior to the receipt of data to be copied using the copy function.
1 If the device is in the REMOTE mode,
press the
REMOTE
LOCAL
key to cause the de-
vice to enter the LOCAL mode.
If some processing is being done, it will
be interrupted.
2 Press the
PAGE
+
key several times
until the LCD indicates page 2 of the
LOCAL MENU.
3 Select the [DATA CLEAR].
Press the
F1
+
key.
4 Execute the [DATA CLEAR].
To cancel the [DATA CLEAR], press the
C E
key. The step of procedure 2 will
be restored on the screen.
REMOTE
LOCAL
[ LOCAL ] 1 / 4
TOOL SELECT ———>
CONDITION ———>
TEST CUT ———>
[ LOCAL ] 2 / 4
DATA CLEAR ———>
COPY ———>
VIEW ———>
[ LOCAL ] 2 / 4
DATA CLEAR ———>
COPY ———>
VIEW ———>
< TEST CUT > 1 / 1
END KEY to START
CE KEY to CANCEL
[ LOCAL ] 2 / 4
DATA CLEAR ———>
COPY ———>
VIEW ———>
END
PAGE
+
F1
+

MIMAKI CF-0912 Specifications

General

Brand	MIMAKI
Model	CF-0912
Category	Plotter
Language	English