— 1.15 —
3 Insert the power cable for the blower
into the AC inlet of the blower unit.
Turn the ring clockwise to fix the cable.
4 Insert the other end of the power cable
into the 3P receptacle.
In the case where a 2-pole receptacle is
used, additionally use the installation
adapter supplied with the unit as an ac-
cessory. Properly ground the earth cable
(green one), then insert the power cable
to the receptacle.
If the earth cable cannot be properly
grounded, contact electrical work shop
in your district.
Power cable for the blower
To Next Page
Loading...
Need help?
General
