Use the following electrical specifications.
Be sure to connect the power cable to
a power outlet with the following
electrical specifications.
Main unit: 100 VAC ±10%
50/60 Hz
500W or higher
Blower: 100 VAC
50/60 Hz
Breaker of 30 A or higher
Do not restart the power until 30 seconds
after turn off.
If the device is restarted, do not turn
on the power until 30 seconds after
turning off. The device may be caused
faulty function.
Do not put any matters on the cable.
Do not bend the power cable and the
communication cable, and do not
placed any matters. These cables may
be broken and heated, the power cable
can cause fire or electric shocks.
Do not dress baggy suits and accessories.
Do not work with dressing baggy suits
and any accessories, and also tie any
long hairs.
Do not move your face in front of cut panel.
Do not move your face and hands in
front of the cut panel while the unit is
working.
The device can wind and touch your
hairs or hands.
The device is moved by our serviceman only.
The device is too sensitive equipment,
so in case if you require movement of
the unit, please contact to our
serviceman.
CAUTION
For safe operation
To Next Page
Loading...
Need help?
General
