MIMAKI CF-0912 User Manual

— 2.35 —
7 Invoke the 3rd page of the CUTTING
CONDITIONS screen for cutter 2.
8 Set the RING DISTANCE and PRESS
CORRECTION to adequate value.
F1
+
..... Input a ring distance.
F2
+
..... Input a press correction.
F3
+
..... Input a vibration.
• If the “– (minus)” key of the respec-
tive function keys is pressed, a
previous value is indicated on the
display.
9 Invoke the 4th page of the CUTTING
CONDITIONS screen for cutter 2.
10 Set the R5 SPEED, R10 SPEED and
R15 SPEED.
F1
+
..... Input an R5 speed.
F2
+
..... Input an R10 speed.
F3
+
..... Input an R15 speed.
• If the “– (minus)” key of the respec-
tive function keys is pressed, a
previous value is indicated on the
display.
11 Enter the input values.
Press the
END
key to enter the input
values.
If you do not enter the input data, press
the
C E
key.
< CUTTER 2 > 3 / 4
RING DIS ∗0.30 mm >
PRESS COR ∗0 g >
VIBRATION ∗OFF >
< CUTTER 2 > 2 / 4
F OFFSET 1.00 mm >
E OFFSET 1.00 mm >
UP ANGLE 15° >
PAGE
+
F1
+
F2
+
< CUTTER 2 > 4 / 4
R5 SPD ∗OFF >
R10 SPD ∗OFF >
R15 SPD ∗OFF >
< CUTTER 2 > 3 / 4
RING DIS 0.10 mm >
PRESS COR 1.00 g >
VIBRATION ∗OFF >
PAGE
+
F1
+
F2
+
F3
+
< CUTTER 2 > 4 / 4
R5 SPD 0.1 mm / s >
R10 SPD 0.2 mm / s >
R15 SPD 0.5 mm / s >
[ LOCAL ] 1 / 4
TOOL SELECT ———>
CONDITION ———>
TEST CUT ———>
END
F3
+

MIMAKI CF-0912 Specifications

General

Brand	MIMAKI
Model	CF-0912
Category	Plotter
Language	English