3-55
Other Useful Functions
3
Useful Function
Output the received data by the ASCII code [ASCII DUMP]
This function makes the host computer send data to the plotter, makes the plotter plot the communication
conditions of the interface through which it receives the data, and makes the plotter plot the data in ASCII
format.
The dump can be executed through the interface to which the host computer is connected.
1
Replace the tool with “pen” ( P.2-6) .
2
Press the key in the local
mode.
3
Press the jog key or to select
[ASCII DUMP] .
4
Press the key.
• You cannot check the dumped contents directly on the computer.
• To cancel the dump function, press the key to return to the local mode and execute
DATA CLEAR ( P.3-52) ,
To Next Page
Loading...
