MIMAKI CG-100SRII - Expand the Cutting (Plotting) Area; Set the EXPANDS Function to on

3-39
3
Useful Function
Expand the cutting (plotting) area
You can reduce the dead space to expand cut (picture drawing) area (EXPANDS function).
The dead space is reduced by 10mm at the left and right.
Set the EXPANDS function to ON.
1
Press the key in the local
mode.
2
Press the jog key or key to
select [SET UP] .
3
Press the key.
4
Press the jog key or key to
select [EXPANDS] .
Pinch roller (left) Pinch roller (right)
EXPANDS: OFF
EXPANDS: ON
When the sheet is set in the rear
DATA CLEAR <ENT >
FUNCTION
SET UP <ENT>
ENTER/HOLD
EXPANDS <en t >