MIMAKI CG-100SRII - Coordinate System

Switch the cutting (plotting) direction
3-42
7
Press the key.
8
Press the key twice for terminating this function.
Coordinate system
The plotter has four different coordinate systems established by combinations of the sheet setting direction
and the rotation of the coordinate axes.
Reset the Setting of ROTATION.
Follow the Steps 1
to 5 of "The Setting
of ROTATION."
Press the jog key
to select
“OFF.”
Press the
key.
Press the
key twice.
ENTER/HOLD
END
< 0° ROTATION >
The sheet is loaded in
the rear of the plotter.
< 90° ROTATION >
The sheet is loaded in
the rear of the plotter.
Rotation: OFF Rotation: ON
Rotation: OFF Rotation: ON
The sheet is loaded in
the rear of the plotter.
The sheet is loaded in
the rear of the plotter.
< 180° ROTATION > < 270° ROTATION >
ENTER/HOLD
END