MIMAKI CG-100SRII - Setting a Sheet

2-12
Setting a sheet
Either a leaf sheet (cut sheet) or a roll sheet can be loaded on the plotter.
The pinch rollers and grit rollers hold the sheet in position.
Locate the pinch rollers so that they match the sheet to be used.
Sheet width
mm inch
CG-100SRII 90 to 1250 3.55 to 49.20
CG-130SRII 90 to 1550 3.55 to 61.00
Pinch roller
Clamp lever
Grit roller