vi
Foreword
About media
Please follow the local regulations to dispose of roll sheets or other media.
Congratulations on your purchase of a CG-SRII series cutting plottver.
CG-SRII series cutting plotter is a highly functional cutting plotter with the high-speed registration mark
detection.
Read this Operation manual carefully and make the most effective use of your plotter.
On This Operation manual
• This Operation manual describes the operation and maintenance of CG-SRII series cutting plotter
(hereinafter referred to as the plotter).
• Please read and fully understand this Operation manual before putting the machine into service. It is
also necessary to keep this peration manual on hand.
• Make arrangements to deliver this Operation manual to the person in charge of the operation of this
plotter.
• This Operation manual has been carefully prepared for your easy understanding. However, please do
not hesitate to contact a distributor in your district or our office if you have any inquiry.
• Description contained in this Operation manual are subject to change without notice for improvement.
• In the case where this Operation manual should be illegible due to destruction or lost by fire or break-
age, purchase another copy of the Operation manual from our office.
• You can also download the latest operation manual from our website.
Reproduction of this manual is strictly prohibited.
All Rights Reserved. Copyright © 2012 MIMAKI ENGINEERING Co., Ltd.
To Next Page
Loading...
