Carriage
The carriage carries the
pen and moves it up and
down. ( P.1-6)
Power switch
The switch turns on/off the
power.( P.2-8, 2-24)
Grit roller
The grit rollers operate in
combination with the pinch
rollers to feed the sheet.
(P.1-7)
Platen
The sheet of media moves
along the platen.
Operation panel
This panel operates this
machine and sets functions.
(P.1-5)
Clamp lever
Pushing a lever down
lowers a pinch roller and
retains the sheet.
Pinch roller
The pinch rollers feed out the
sheet while pressing it against
the grit rollers. ( P.1-7)
Pen line
The plotter performs cut-
ting or plotting on the pen
line.
Pinch roller guide mark
This marks indicate the
locations at which the
pinch roller are to be set.
Roll stoppper
When setting a sheet,
prevents the roll sheet
from rotating.
( P.2-18)
Cut slot
The slot is used for cutting the
sheet manually.
(P.2-23)
To Next Page
Loading...
