Connecting the cables
1-11
1
Before Use
Connecting the power cable
After connecting the interface cable, you must connect the power cable.
Connect the power cable with the plug outlet of the following power specifications.
•Voltage ： AC100 - 240V ± 10%
• Frequency ：50/60Hz
• Capacity : 145 VA or less
Be sure to connect
the ground wire.
• Using without the
ground wire
causes the
damage of this
device and electric
shock that may be
very dangerous.
Regarding the use
of two polar plug
outlet, you must
connect the
auxiliary ground
adapter to the plug
of power cable.
• Earth the green wire (ground wire) of the
ground adapter. If you cannot, consult with
an electrician.
To Next Page
Loading...
