3-57
Other Useful Functions
3
Useful Function
9
Press the key..
10
Press the jog key or to select the set values.
• See pages P.3-57 for the contents of each setting item.
11
Press the key to confirm the value.
イ
12
When you want to terminate this procedure,
press the key twice.
Setting Items
Boud rate
1200, 2400, 4800, 9600, 19200, 38400 （bps）
Data bits
7, 8 （bit）
Parity
NON, EVEN, ODD
Stop bits
1, 2 （bit）
Handshake
AUTO HARD
MGL-IIc HARD, ENQACK, X-PRM, SOFT
MGL-Ic1 HARD, XONOFF
Step size
AUTO (MGL-IIc) 0.025 (mm)
AUTO(MGL-Ic1) 0.05 (mm)
MGL-IIc 0.025, 0.01 (mm)
MGL-Ic1 0.05, 0.025, 0.1 (mm)
Close tim
*1
*1: Sets the segmentation of the target data for multiple cut, waiting time before starting division cut or
waiting time before starting sorting output.The setting range is 3 to 60 seconds. If no data is
received when the established waitingtime has elapsed after the completion of cutting, the device
will judge that one piece ofdata has completed to enable discrimination between the completed
data and the subse-quent data.
3 to 60 (Seconds)
ENTER/HOLD
To Next Page
Loading...
