3-17
Cut Out Data with Registration Mark
3
Useful Function
Precautions on registration mark detection
Observe the following precautions on registration mark detection.
• To ensure that the distance between registration marks is equal to the cutting length, input the distance
between the printed marks found by the mark detecting function. (DIST.REVI P.3-20)
In this case, scale compensation between the registration marks overrides distance compensation.
After that, if you change the distance compensation value, the scale compensation between the
registration marks will be invalid.
• When you retry sheet detection, sheet inclination compensation, scale compensation between
registration marks, and the position of the origin are cleared.
• Once the plotter detects marks, it will set the origin at the location of TP1.
You can change the position of the origin to a different location using jog keys ; the origin at the new
location supersedes the origin at TP1.
• The rotating function is rendered ineffective.
• Locate registration marks so that the line connecting the corners of four marks forms a rectangle.
Registration marks arranged unevenly can result in deviated cutting.
To Next Page
Loading...
