3-33
Cut Out Data with Registration Mark
3
Useful Function
5
Press the key to terminate the jog mode.
• The plotter returns to the local mode.
6
Press the key.
7
Select [MARK sensor] by pressing the
jog key or .
8
Press the key.
9
Press the key after confirming [SENSOR CHK] is
displayed.
10
Select the length of the registration
mark and shape of the registration
mark detection.
• For details on setting the [SIZE] and [FORM], refer
to the [MARK DETECT] setting procedure.
(
P.3-13)
11
Perform registration mark detection with the jog key .
( Next page)
END
To Next Page
Loading...
