EasyManua.ls Logo

MIMAKI CJV300-130 - Page 103

MIMAKI CJV300-130
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-9
5
2
1
Press the
(MENU)
key in LOCAL.
MAINTENANCE MENU will be displayed.
2
Press the key.
“STATION” will be selected.
3
Press 3 times, and then press the
key.
“CUSTODY WASH” will be selected and the
carriage will move onto the platen.
4
Clean the wiper and the bracket.
(1) Open the front cover then pull out it by
holding projections at both ends of the wiper.
(2) Clean the wiper and bracket with a clean
stick dipped in cleaning solution for
maintenance. () Wipe off so that cleaning
solution for maintenance will not remain.
(3) Insert it in the original position by holding the
projections at both ends of the wiper.
5
Press the key.
6
Clean the cap rubber.
Wipe off the ink sticking to the cap rubber with a
clean stick dipped in maintenance solution for
maintenance.
Wipe off so that maintenance solution for
maintenance will not remain.
At this time, the discharge passage is cleaned
automatically.
7
Press the key.
8
Fill up the cap with cleaning solution for
maintenance
If the cleaning solution cartridge is not usable,
suck maintenance solution into a dropper and fill
up the cap with it. Fill up the cap with
maintenance solution on the verge of overflow
from the cap.
9
Press the key.
Until wiper/ bracket cleaning is competed,
“COMPLETED” is displayed on the screen. After
the work up to the step 3 is completed, press the
[ENTER] key. If you press the [ENTER] key before
cleaning is completed, the machine moves to the
next washing procedure.
Until wiper cleaning is competed, [COMPLETED
(NEXT): ENT] is displayed on the screen. After the
work up to the step 5 is completed, press the
[ENTER] key. If you press the [ENTER] key before
cleaning is completed, the machine moves to the
next washing procedure.
Carriage
Projection
Until washing liquid is filled, [COMPLETED
(NEXT): ENT] is displayed on the screen. After the
work up to the Step 8 is completed and you close
the front cover, press the [ENTER] key. If you
press the [ENTER] key before washing liquid is
filled, the carriage returns to the original position.
Cap rubber

Table of Contents

Other manuals for MIMAKI CJV300-130

Related product manuals