Machine Settings
3-35
3
Extended Functions – Printer –
Change the operation condition of the room temperature
If you print in the status that the temperature of the place in which the machine has installed (room temperature)
is out of the usable temperature range, ink discharging defect or changing color may occur, and it adversely
affects the printing quality.
Here, select the operation if the room temperature is out of the usable temperature range when printing.
1
Press the key in LOCAL to select the
printing mode.
2
Press the key.
3
Press to select [MACHINE SETUP].
4
Press the key.
5
Press to select [ROOM TEMP.].
6
Press the key.
7
Press to select a set value.
Not wait ARR. : The error message is displayed for a moment, and printing starts.
Wait arrival : After the error message is displayed, wait until the room temperature reaches the
proper value. Then, printing starts.
8
Press the key.
• Press the key several times to end the setting.
• For the details of the usable temperature range, refer to P. 8-4 “Allowable temperature”.
• If the room temperature is out of the usable temperature range at the start of printing, the error message
below is displayed to inform you of it.
To Next Page
Loading...
Need help?
General