MIMAKI JV5 Series User Manual

3-38
Switch Setting of Ink Supply Path
For the ink supply, condition of the ink cartridge to be used first by the double-cartridge automatic switching
function can be selected.
This setting is only available for 4-color set.
1
Press the key in LOCAL to select the
printing mode.
2
Press the key.
3
Select [MACHINE SETUP] by pressing the
keys.
4
Press the key.
5
Select [CART.PRIORITY] by pressing the
keys.
6
Press the key.
7
Select the condition of ink to be used first by pressing
the keys.
INK LEVEL : Low ink cartridge is used first
EXP. DATE : Close-to-date ink cartridge is used first
8
Press the key.
9
Press the key several times to end.
• When expired ink cartridge is set, the expired cartridge is used first regardless of the setting below.
• When the optional bulk ink system (MBIS) is used and the MBIS is set in both slots, the setting below is
effective.
• When both an ink cartridge and the bulk ink system (MBIS) are set in the supply paths of the same
color, see the next page.
<LOCAL . 1> [ #01 ]
WIDTH:****mm
FUNCT I ON
SETUP <ENT>
FUNCT I ON
MACH I NE SE T UP < EN T >
MACH I NE SE T UP
CART . PR I OR I TY <e n t >
CART . PR I OR I TY
SELECT : I NK LEVEL

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English