MIMAKI JV5 Series User Manual

When Nozzle Clogging Cannot Be Solved
6-22
5
Mount an ink cartridge on the ink station.
• When an ink cartridge has been set, the machine is supplied with ink
automatically.
• The ink station has an insertion slot allocated to each ink color. Set the ink cartridge according to the
cartridge label under the ink station.
6
When ink has been supplied to the machine completely,
the screen returns to LOCAL.
When the Machine Cannot Be Supplied with Ink in Step 5
When various ink errors including "Almost no ink" and "No ink" occur, ink does not start to be supplied to the
machine.
When ink does not start to be supplied to the machine in Step 5:
(1) Press the key to return to the screen in Step 2.
(2) Press the key to check the state of the ink cartridge.
(3) Correct ink errors ( P.7-5) and repeat the operations from Step 2.
• If blurring or missing of characters is found in printing after the machine has been supplied with ink
anew, see "Perform head cleaning depending on the test printing result" ( P.2-39) or "FILL UP INK"
(P.6-18).
Se t : SS21 - 4co l o r I nk
--C-Y-KK
FILLING UP NOW.
00 : 00
Front side
4-color model:
6-color model:
6 colors + white model (SS21W-2) :
7 colors model (Eco-PA1):
8 colors model (ES3):
for the firmware V. and later
<LOCAL . 1> [ #01 ]
WIDTH:****mm

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English