Chapter 4 Maintenance
104
4.3 Consumable Item Replacement
To order replacement consumable items, contact your local dealer or our service office. For more information
on consumable items, refer to our website (https://mimaki.com/supply/inkjet.html).
• Avoid storing this product in locations accessible to children.
• When disposing of the product, contact an industrial waste disposal operator or dispose of the
product in accordance with the local laws and regulations.
Wiper Replacement
This product maintains a count of the number of wiping cycles. The "Replace Wiper" message appears when
a preset count is reached. Replace dirty or warped wipers with new ones.
1
"Replace Wiper" appears on the display.
2
On the LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
3
Select [Station Maint.] > [Replace Wiper], then press the [ENTER] key.
• The carriage moves over the platen.
4
Open the front cover.
5
Remove the wiper.
• Hold the lug at the rear of the wiper bracket, then pull out the wiper.
6
Clean the wiper slider.
• Wipe off any ink and dust adhering using a cleaning stick moistened with maintenance liquid. Wipe
off the maintenance liquid. Make sure none remains.
To Next Page
Loading...
