Chapter 1 Before Use
23
• Attach the clamp changeover sliders to the pinch rollers at the left and right-hand ends of the
media. The pinch rollers can be raised by attaching clamp changeover sliders. This prevents
gripping the left and right-hand ends of the media for consistent feeding.
Platen
The platen features a large number of holes used to secure the media under vacuum pressure. This also
features a cutting slot for cutting the media.
Media Sensor
The media sensor detects the presence/absence of media. The sensor must be covered by the media to
detect the media width.
1
To Next Page
Loading...
