Chapter 2 Printing
48
2.1 Print Process
1.
Turn on the power.
"Turning On the Power"(P. 29)
2.
Connect a RIP PC to the machine.
"Using a USB Cable"(P. 31)
"Using a LAN Cable"(P. 31)
3.
Setting Up RIP Software
"Installing RIP Software"(P. 34) (required first time only)
"Obtaining Color Profiles"(P. 34)
"Setting Up RIP Software"(P. 35) (required first time only)
4.
Adjust print head height.
Adjust the height adjustment lever to suit the media. "Adjust Print Head Height"(P. 51)
Height adjustment lever
Low
Hi
Height adjustment
lever
5.
Loading the Media
To Next Page
Loading...
