Chapter 2 Printing
49
This machine can be used with roll media. "Loading the media"(P. 53)
6.
Check the state of the print head nozzles.
"Test Printing"(P. 60)
Good example Bad example
Deflection Nozzle clogging
7.
Clean the head to clear malfunctioning nozzles.
There are three different head cleaning methods. Choose the head cleaning method based on test print
results. "Head Cleaning"(P. 62)
8.
Adjust the media feed amount.
"Feed Correction"(P. 63)
Second band
First band
Media feed direction
9.
Adjust the drop position for bi-directional printing.
"Correcting the Drop Position"(P. 65)
The drop position correction value here will be “+4.0”.
Media feed direction
2
To Next Page
Loading...
