Chapter 1 Before Use
25
Operating Panel
This is used to control the product and make/change settings.
REMOTEMENU
TEST PRINT
CLEANING
xxxx
No. Name Outline
1 Display "Display"(P. 26)
2 [SEL] key Selects the function for the corresponding [FUNCTION] key.
3 [FUNCTION] key Used for test printing, head cleaning, and editing settings "[FUNCTION]
key"(P. 27)
4 [JOG] key Used to move the carriage, feed media, and select settings
5 [END/POWER]
key
Used to cancel the last setting entered, return to the previous level of the setting
menu, or to turn power on and off
• Illuminates in blue when the power is on. "Turning On the Power"(P. 29)
• To turn off the power, hold down the key. "Turning Off the Power"(P. 30)
6 [ENTER] key Used to move to the next level menu and to confirm settings. This can also be
used to display product information. "Displaying Machine Information (Local
Guidance)"(P. 28)
7 Status lamp This lamp indicates the product status.
Off Indicates LOCAL mode. Used for test printing, maintenance,
and settings
Light
blue
Illumina
ted
Indicates REMOTE mode. The product is in standby to receive
print data.
Flashin
g
Indicates printing is underway. This also flashes to indicate
test printing—for example, when printing built-in patterns.
Blue Illumina
ted
Indicates that data remains to be printed. Switch to REMOTE
mode and start printing
Red Flashin
g
An error has occurred. Refer to the error code list and take
appropriate action. "Error Message"(P. 128)
Illumina
ted
An error (SYSTEM HALT) has occurred. Contact our service
office. "SYSTEM HALT"(P. 132)
1
To Next Page
Loading...
