Chapter 5 Troubleshooting
132
SYSTEM HALT
Error
number
Message Corrective action
406 WIPER ORG
1. Clean the wiper and around the wiper.
"Wiper Cleaning"(P. 92)
2. Turn off the power on the machine and turn it on after a while.
"Turning Off the Power"(P. 30)
1c3 PCB SLDR2H
1. Turn off the power on the machine and turn it on after a while.
"Turning Off the Power"(P. 30)
• If any other SYSTEM HALT number is displayed, Turn off the power on the machine and turn it
on after a while. "Turning Off the Power"(P. 30)
To Next Page
Loading...
