Chapter 1 Before Use
21
Rear and Right Side View
No. Name Overview
1 Clamp lever (rear) Linked to the clamp lever at the front.
2 Media Sensor Detects whether media is present. "Media Sensor"(P. 23)
3 Blowing fan Blows air to dry ink after printing.
4 Feeding unit Holds the roll media before printing. Compatible with 2-inch and 3-inch
paper rolls.
5 Ink IC chip slot The ink IC chip provided with the Ink bottle is inserted here to register Ink
bottle information. "Replacing Ink"(P. 38)
6 AC inlet Use the power cable provided. "Connecting the Power Cable"(P. 29)
7 Main power switch Main power supply for the product To prevent print defects attributable to the
print head (e.g., nozzle clogging, deflection), do not turn off the main power
supply. "Turning On the Power"(P. 29) "Turning Off the
Power"(P. 30)
8 LAN port Used when using the network function. "Using a LAN Cable"(P. 31)
9 USB port Connects to PC via a USB interface cable. "Using a USB Cable"(P. 31)
10 Maintenance liquid
cartridge
Used to automatically feed maintenance liquid to the cap, to drip liquid on to
the wiper to prevent ink solidification, and to prevent ink solidifying inside the
ink discharge channel during maintenance.
1
To Next Page
Loading...
