Chapter 2 Printing
54
Name Overview
ON/OFF button Press the button to start/stop the take-up unit. The setting can be altered so that the
take-up unit operates only while the button is depressed. "Machine setup
menu"(P. 81)
Adjusting the Torque Limiter
The take-up unit is fitted with a torque limiter.
Turn the torque limiter adjustment nut to adjust take-up tension. The torque limiter is initially set to "Medium"
when shipped.
Adjustment nut
Torque scale
Torque (Mid) Torque (Max.)Torque (Min.)
l
Increase tension (clockwise)
Increase tension when using with heavy or thick media, such as tarpaulin. Perform adjustments manually.
• Do not use the torque adjustment handle. Using the torque adjustment handle will cause
overtightening. Overtightening may damage the take-up unit.
l
Decrease tension (counterclockwise).
Decrease tension when using lightweight media. Use the "torque adjustment handle" provided.
Using the Edge Guides
Adjust the edge guide position to suit the roll media diameter.
Media diameter Distance between edge guide and
media edge
Not more than ⌀120 mm 1 mm
⌀121 mm to ⌀160 mm 3 mm
To Next Page
Loading...
