Chapter 2 Printing
68
4
Check the settings and alter as necessary.
• Specify the following settings by clicking the function icons shown on the right-hand side of the
screen:
(normal printing): Specifies settings like enlargement/reduction and number of copies.
(print conditions): Selects a color profile for the media and ink set loaded in this machine.
• For more information, refer to the RasterLink reference guide. https://mimaki.com/
download/software.html
5
Print image data.
• Click (execute) from the function icons on the right-hand side of the screen. Select "Immediate
Print" or "RIP and Print", then click [Start].
• Media width must be reacquired after replacing media.
(1) Select the tab for TS100-1600 in the main window.
(2) Click (Update the printer status) in the Printer tab.
To Next Page
Loading...
