Check digit verification: The check digit verification is optional.
Check digit transmission: By setting Enable, check digit will be transmitted.
Max. /Min. code length: Refer to Max. /Min. code length of
“4-12 Code 39 (Code 32, Trioptic Code 39)”
.
Code ID setting: Refer to Code ID setting of
“4-7 UPC-A
.”
Insertion group selection: Refer to Insertion group selection of
“4-7 UPC-A”
.
Truncate leading zeros: The leading “0” digits or all “0” digits of UCC/EAN 128 barcode characters can
be truncated when the feature is enabled.
To Next Page
Loading...
