Mindeo FS580 - Upc-E

30
4-8 UPC-E
Read: Format
System character “0”
Data digits (6 digits)
Check digits
Check digit verification: The check digit verification is optional.
Check digit trans.: By setting Enable, check digit will be transmitted.
Code ID setting: Refer to Code ID setting of “4-7 UPC-A” .
Insertion group selection: Refer to Insertion group selection of “4-7 UPC-A” .
Supplement digits:
Format
System character “0”
Data digits (6 digits)
Check digit
Supplement digits 2 or 5
Truncation/Expansion:
Truncate leading zeros - Refer to Truncation/Expansion of “4-7 UPC-A” .
Expand to EAN-13 - It extends to 13-digits with “0” digits when the feature is set to be enabled.
Example: Barcode “01236547”, Output: “0012360000057”.
Expand to UPC-A - It extends to 12-digits when the feature is set to be enabled.
Example: Barcode “01236547”,
Output: “012360000057”.
Truncate system character - The system character “0” of UPC-E data can be truncated when this
feature is enabled.
Add country code - The country code (“0” for USA) can be added when the feature is enabled.
SETUP
Multiple-scan setting
Single-scan setting
Option barcode
Option
Alpha. value
Read
Disable
00
Enable
01*
Check digit verification
Disable
00
Enable
01*
Check digit trans.
Disable
00
Enable
01*