Check digit verification: The UK/Plessey has two optional check digits. The check digit 1 and check digit
2 will be calculated as the sum module 10 or 11 of the data digits.
Check digit transmission: By setting Enable, check digit will be transmitted.
Max./Min. code length: Refer to Max./Min. code length of
“4-12 Code 39 (Code 32, Trioptic Code 39)”
.
Code ID setting: Refer to Code ID setting of
“4-7 UPC-A”
.
Insertion group selection: Refer to Insertion group selection of
“4-7 UPC-A”
.
To Next Page
Loading...
