Mindeo FS580 - 1 Specifications; Technical Specifications

1
1 Specifications
1-1 Technical specifications
Table 1-1 Technical specifications @25°C
Item
Description
Input voltage
5 VDC ± 5%
Scanning current
RS232: 145mA (Typ.) / 235mA (Max.)
USB: 145mA (Typ.) / 220mA (Max.)
Standby current
RS232: 0.9mA(Deep Sleep) or 25mA
USB: 30mA
Laser
650nm laser diode
Scan rate
100±10 scans/second
Scanning angle
Wide (Default): 55°±5°, decode rate: 0.5 time/scan
Narrow: 40°±5°, decode rate: 1 time/scan
Pitch angle
±65° (Condition: 100% UPC at 5 in. See Figure 1-1 )
Skew angle
±50° (Condition: 100% UPC at 5 in. See Figure 1-1 )
Roll angle
±35° (Condition: 100% UPC at 5 in. See Figure 1-1)
Decode capability
UPC-A, UPC-E, UPC-E1, EAN-13, EAN-8, ISBN/ISSN, Code 39, Code 39 full
ASCII, Code 32, Trioptic Code 39, Interleaved 2 of 5, Industrial 2 of 5 (Discrete
2 of 5), Matrix 2 of 5, Codabar (NW7), Code 128, Code 93, Code 11 (USD-8),
MSI/Plessey, UK/Plessey, UCC/EAN 128, ISBT128,China Post, GS1 DataBar
(formerly RSS) variants
Indicator
Beeper, LED
Interface supported
RS232, USB Keyboard, USB virtual COM
Scan mode
Single scan, Continuous scan, Auto-detection, Scan Output Buffering,
Command
Housing makings
Zinc alloy
Dimensions
Height× Width ×Depth: 35.7mm × 41.3mm × 17.2mm (maximum)
Weight
70g
Cable
RJ-45
Temperature
Operating: -10°C to 60°C (-4°F to 140°F);
Storage: -40°C to 70°C (-40°F to 158°F)
Humidity
5% to 90% (non-condensing)
Programming method
Method I: Manual (scanning special barcode in sequence)
Method II: Send command via RS232 interface or USB virtual COM
Firmware upgrade
Online
Decoding depth
& Max. resolution
(1 mil = 0.0254 mm)
4 mil: 45- 75 mm
5 mil: 45-105 mm
10 mil: 15-230 mm
15 mil: 30-350 mm
20 mil: 40-420 mm
30 mil: 40-600 mm
55 mil: 80-700 mm
See section “1-3 Decode zone ” for more information.
Safety and Certification
Laser safety:EN60825-1,Class 1
EMC:EN55022,EN55024
Protection class:IP64