Check digit verification: The MSI/Plessey has one or two optional check digits. There are three methods
to verify check digits, i.e. Mod10, Mod10/10 and Mod 10/11. 1 or 2 check digits will be calculated as the
sum module 10 or 11 of the data digits.
Check digit transmission: By setting Enable, 1 or 2 check digits will be transmitted upon the selected
check digit verification method.
Max./Min. code length: Refer to Max./Min. code length of
“4-12 Code 39 (Code 32, Trioptic Code 39)”
.
Code ID setting: Refer to Code ID setting of
“4-7 UPC-A”
.
Insertion group selection: Refer to Insertion group selection of
“4-7 UPC-A”
.
To Next Page
Loading...
