Need help?Do you have a question about the Mindray accutorr plus and is the answer not in the manual?
General| Model | Accutorr Plus |
|---|---|
| Manufacturer | Mindray |
| Parameters Monitored | NIBP, SpO2, Pulse Rate, Temperature |
| NIBP Method | Oscillometric |
| Display Type | LCD |
| Touchscreen | No |
| Battery Type | Rechargeable Lithium-ion |
| Power Supply | AC 100-240V, 50/60Hz |
| Relative Humidity | 10% to 95% (non-condensing) |
| Category | Medical Equipment |
| Device Type | Patient Monitor |
| Battery Life | Up to 8 hours |
| Interface | USB, RS232 |
| Operating Temperature | 5°C to 40°C |
| Storage Temperature | -20°C to 55°C |
| Altitude Range | Up to 3000 m |
Alerts to potentially serious outcomes for patients or users.
Alerts to special care needed for safe and effective use of the device.
Detailed list and description of front panel components.
Initial setup and powering on the Accutorr Plus monitor.
Configuring the patient size for measurements.
Setting the initial cuff inflation pressure for NIBP.
Assigning patients to specific room and bed identifiers.
Procedure for taking non-invasive blood pressure readings.
Setting up automatic NIBP measurements at timed intervals.
Setting and managing alarm limits and violations.
Silencing audible alarm tones temporarily or permanently.
Accessing and managing historical patient measurement data.
Performing and understanding SpO2 measurements on advanced models.
Using optional modules for temperature readings.
Understanding battery power and management.
Customizing default settings for the monitor.
Interpreting operational status and error messages.
Procedure for cleaning the unit after contact with biological material.
Steps for replacing the lithium ion battery in the unit.
Performance specs for SpO2 using Nellcor sensors.
Performance specs for SpO2 using Masimo sensors.
Leakage currents and dielectric withstand specifications.
To Next Page