Mindray Accutorr 3 - Service Manual

Other manuals for Mindray Accutorr 3

Quick Reference Guide12 pages

Operator's Manual102 pages

Questions and Answers:

A
Anna DodsonJul 31, 2025
What to do if my Mindray Accutorr 3 monitor fails to start?
- D
  Diana SandersJul 31, 2025
  If your Mindray Medical Equipment monitor fails to start, first ensure the AC mains is properly connected and the battery capacity is sufficient. If the issue persists, inspect the cables: between the keypad board and main board, the power board and power management board, and the main board and power management board, ensuring they are correctly connected. If cables are not the issue, the power board, power management board, or the main board may be defective and require replacement.
A
aliciafergusonAug 4, 2025
Why is the display blank on my Mindray Accutorr 3 Medical Equipment?
- M
  Mrs. Katherine GoodmanAug 4, 2025
  If the display on your Mindray Medical Equipment is blank or black, begin by checking the cable between the display and main board, as well as the backlight cable, to ensure they are correctly connected and undamaged. If the connections are secure, the main board or the display itself may be defective, requiring replacement.
D
Danielle ParkerAug 8, 2025
How to fix buttons that don't work on Mindray Medical Equipment?
- M
  Miss Laura LesterAug 8, 2025
  If the buttons on your Mindray Medical Equipment do not work, check the cable between the keypad board and the main board to ensure it is correctly connected. If the cable is properly connected, the keypad board may have failed and require replacement.
M
Michael HarrisAug 13, 2025
What to do if images are overlapped on Mindray Accutorr 3 Medical Equipment?
- T
  Tina MaciasAug 13, 2025
  If images appear overlapped or distorted on your Mindray Medical Equipment, the main board may be faulty. Try replacing the main board or upgrading it with the latest software. Also, verify that the cable between the display and main board, including the backlight cable, is correctly connected.
T
Taylor DunnAug 17, 2025
Why won't my Mindray Medical Equipment battery charge?
- L
  Lori BrownAug 18, 2025
  If your Mindray Medical Equipment battery won't charge, the battery itself may be defective and needs replacing. Alternatively, check the cable between the battery interface board and the power management board to ensure it's properly connected. If the cable is fine, the power management board or the battery interface board could be defective and might need replacing.
S
Scott RoseAug 21, 2025
What to do if Mindray Accutorr 3 fails to load modules?
- M
  Mrs. Gloria BaldwinAug 22, 2025
  If your Mindray Medical Equipment fails to load modules, first check the cable between the external converter board inside the module and the converter board to ensure it is correctly connected. If the connections are correct, replace the converter board. If the issue persists, check the cable between the main board and power management board. If the connections are correct, replace the power management board or the main board.
N
natalie20Aug 26, 2025
What to do if module loading succeeds but parameters do not function on Mindray Accutorr 3?
- K
  Kevin BeckAug 26, 2025
  If your Mindray Medical Equipment module loads successfully but the parameters do not function, check the cables connecting the converter board and the corresponding parameter module inside the module. If the cables are correctly connected, the parameter module or the converter board inside the module may be defective and require replacement.

Mindray Accutorr 3 Specifications

General

Category	Medical Equipment
Manufacturer	Mindray
Model	Accutorr 3
NIBP Technology	Oscillometric
SpO2 Measurement Range	0-100%
Pulse Rate Range	25 - 250 bpm
Display Type	LCD
Battery Type	Lithium-ion
Battery Life	Up to 8 hours
Device Type	Patient Monitor
Parameters Monitored	NIBP, SpO2, Pulse Rate, Temperature
Power Source	AC Power, Battery
Connectivity	USB
Dimensions (W x H x D)	80 mm x 192 mm x 62 mm