Mindray BeneHeart D3 User Manual

21 - 8 Defibrillator/Monitor Operator’s Manual
21.6.7 Resp Setup Menu
21.6.8 SpO
2
Setup Menu
Menu Item Options/Range Default Description
RR Alarm On, Off Off /
RR Alm Lev High, Med, Low Med /
Sweep 6.25 mm/s, 12.5 mm/s, 25
mm/s
6.25 mm/s Sets the Resp waveform speed.
RR High Adu (Low+2) to 100 30 Step: 1 rpm
Ped 30
Neo (Low+2) to 150 100
RR Low Adu 6 to (High-2) 8
Ped 8
Neo 30
Apnea Time 10 s, 15s, 20s, 25s, 30s, 35s,
40s
20 s /
Menu Item Options/Range Default Description
SpO2 Alarm On, Off On /
SpO2 Alm Lev High, Med Med /
Sweep 12.5 mm/s, 25 mm/s 25 mm/s Sets the SpO
2
waveform speed.
SpO2 High Adu (Low+1) to 100 100 Step: 1%
Ped 100
Neo 95
SpO2 Low Adu Desat Limit to
(High-1)
90
Ped 90
Neo 90
Desat Adu 50 to (High-1) 80
Ped 80
Neo 80
Pitch Tone Mode 1, Mode 2 Mode 1 Sets the SpO
2
tone mode
.
Sat-Seconds 0s, 10s, 25s, 50s, 100s 0s For Nellcor SpO
2
module only.
Sensitivity Mindray SpO
2
High, Med, Low Med Different options are available
to match the SpO
2
module
used.
Masimo SpO
2
High, Normal, APOD Normal
Average Time 2-4s, 4-6s, 8s, 10s, 12s, 14s,
16s
8s For Masimo SpO
2
module only.
Fast SAT On, Off Off
Display SIQ On, Off Off
Alarm Delay 0s to 15s 6s

Mindray BeneHeart D3 Specifications

General

Type	Defibrillator
Display	Color TFT LCD
Display Size	5.7 inches
Waveform	Biphasic Truncated Exponential (BTE)
Heart Rate Range	15-300 bpm
SpO2 Range	0-100%
NIBP Measurement Method	Oscillometric
Printer Type	Thermal
Paper Width	50 mm
Paper Speed	25 mm/s
IP Rating	IP44
Modes	Manual, AED, Pacing
AED Mode Energy Sequence	150J, 200J
Charging Time	<5 seconds to 200J
Battery Type	Lithium-ion
ECG Monitoring	3-lead
Energy Selection	1-360 J (Manual Mode)