Mindray DP-50 PT - Access Control; Access Setting

Patient Data Management 9-15
 Print Task
List of the current printing task. Displays the file name, status (printing or suspended),
printer name, submit time etc.
If all print tasks are finished, the print icon will disappear from the screen, if not, please
check the manager to see if there is any failure task.
In the Task Management dialogue box, patient ID, name, destination, progress, type, status,
content and task created time are displayed.
You can do the following operations:
 Delete
Click [Cancel] to cancel the selected task.
 Retry
Click [Retry] to retry the failed task. When the printer ran out of ink or paper, tasks in
print list will be paused. Click [Retry] to continue the paused print task.
 Select All
Click [Select All] to select all the tasks.
 Task Status
Select the undergoing task, the system will display its detailed status information or error
information.
When there is/are task(s) undergoing, the task management icon displays as , you
can click the icon to check the process.
When there is/are task(s) failed, the task management icon displays as , you can
click the icon to check the failure reason.
When the task management icon displays as , it means no task is undergoing or
failure.
 DICOM Service Setting
Click [Service Setting] to enter DICOM preset. See section 10.3 DICOM Service.
9.7 Access Control
9.7.1 Access Setting
The system support user type of:
 Administrator
The system administrator can view all patient data, such as patient information, image
and report, etc.
 Operator
The operator can only view the exam information saved in the system and operated by
himself or herself, such as patient information, image and report, etc. The operator
cannot view the exam data operated by others.
Emergency operators are general ones, they can enter the system without entering
password. But they can’t modify or delete the password.