9-4 Patient Data Management
9.2.5 Quickly Saving Images to USB Flash Drive
Use user-defined keys to quickly save the single-frame or cine to USB flash drive.
The image file is stored in the directory: U disk\ US Export\ patient folder\ exam folder\
Image ID.bmp, here,
Patient folder name: patient name+ patient ID
Exam folder name: exam mode+ exam time
To store single-frame image to USB flash drive:
(1) Set the user-defined key through the path: [Setup]→ [System Preset]→ [Key Config].
Select a key in the Key Function page on the left side and select “Send image to
USB disk” in the Output page of Function field on the right side.
(2) Return from Preset to the main screen.
(3) Press the user-defined key to save the image to the USB flash drive.
To store cine to USB flash drive
Save cine images to a USB flash drive in the AVI format.
(1) Set the user-defined key through the path: [Setup]→ [System Preset]→ [Key Config].
Select a key in the Key Function page on the left side and select “Send Cine to USB
disk” in the Output page of Function field on the right side.
(2) Return from Preset to the main screen, scan and freeze an image.
(3) Press the user-defined key to save the cineloop.
9.2.6 Quickly Saving Full Screen Image to the System
This function can save the current full screen image to the system with the image in real-
time status.
1. Set the user-defined key through the path: [Setup] (by pressing <Setup>)→ [System
Preset]→ [Key Config]. Select a key in the Key Function page on the left side and select
“Send Screen” in the Output page of Function field on the right side.
2. After the setting, you can use the user-defined key to save full screen image to the
system.
9.2.7 Thumbnails
The stored images or cineloops are displayed in the form of thumbnails on the screen:
In the iStation screen, the thumbnails refer to the images stored for the selected
exam or the selected patient.
In the scanning or freeze mode, the thumbnails refer to the images stored in the
current exam.
In the Review screen, the thumbnails refer to the images stored in the same exam.
In the Review screen, open an image to enter the image analyzing status, all the
thumbnails belong to the exam are displayed.
When you move the cursor onto a thumbnail, its name and format will be displayed.
9.2.8 Image Review and Analysis
You can review and analyze the stored images (only refer to the images stored in the system
default path).
To Next Page
Loading...
