11. Error messages | 11.2 - General error messages | 175
11.2 General error messages
Display Error and Possible Cause
Err 10 Test is active, no gross weight.
Err 11 No weight value (e.g. wrong string input).
Err 12 Weighingpoint is not started/in standby.
Err 14 Weighingpoint is busy for a time, dont show error message.
Err 15 Device with wrong serialnumber.
Err 33 Wrong parameter
Err 41 Major system error
Err 42 Major system error in controls.
Err 43 Monitoring time has expired.
Err 44 Cannot save to EAROM.
Err 45 Cannot load from EAROM.
Err 53 The selected interface is in use.
Err 61 CAL switch is closed.
Err 62 Calibration cannot be started.
Err 63 The weighing point parameters could not be saved.
Err 64 The default SPAN could not be set.
Err 66 Weighing point is in use.
Err 67 Weighing point is not tared.
Err 68 No mechanical stability of the scale.
Err 69 Weighing point is not in use.
Err 70 Tare is active.
To Next Page
Loading...
Need help?
General
