3. Device description | 3.3 - Housing | 17
3.2.1 Communication protocols
For
RS‑232-/RS‑485
interfaces:
– Remote display protocol
– Printer
– SMA protocol
– ModBus RTU protocol
Field bus slave (options):
–
ProfiBus‑DP
– DeviceNet
– ProfiNet I/O
– EtherNet/IP
3.3 Housing
3.3.1 Control panel housing
The keypad and the display form one unit with the front. Cable connections
are made at the rear panel of the housing. A rectangular cut-out is required
for the installation.
Materials
Component Material
Housing Aluminum
Front panel Stainless steel
Gasket EPDM
Foil keypad PET
To Next Page
Loading...
Need help?
General
