Need help?Do you have a question about the Minebea Intec PR 5310/12 and is the answer not in the manual?
General| Type | Checkweigher |
|---|---|
| Model | PR 5310/12 |
| Manufacturer | Minebea Intec |
| Display | LCD |
| Housing Material | Stainless Steel |
| Protection Class | IP65 |
| Operating Temperature | -10 °C to +40 °C |
| Storage Temperature | -20 °C to +60 °C |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Approval | OIML |
| Application | Industrial |
| Interfaces | RS232 |
| Relative Humidity | Max. 85 %, non-condensing |
Covers essential safety precautions, intended use, and initial inspection.
Details installation, opening the device, power, and grounding requirements.
Outlines procedures for device repairs, maintenance, and handling sensitive components.
Provides essential safety warnings and general procedures before starting installation.
Covers storage conditions, installation location, unpacking, and acclimatizing the device.
Details how to connect cables using glands and ensure proper installation.
Details how to connect analog load cells and platforms using various cable types.
Guides on switching the device on/off, warm-up time, and power failure behavior.
Details how to navigate menus and adjust device parameters via the keypad.
Covers setting metrology parameters, configuring limits, and digital inputs/outputs.
Lists error messages related to the measuring circuit and general system errors.
Details specific error numbers and their causes related to weighing point operations.
To Next Page
