CONTENTS
17
All-Terrain
Great for high‑trash
recreational areas, fields and
historical locations including
most general detecting.
All-Terrain Modes are designed for
searching inland sites including parks,
agricultural fields, pasture, ruins, and other
sites of modern or ancient habitation where
there may be coins, jewellery and other
relics. There is often a lot of other metallic
litter such as iron nails, aluminium foil, pull
tabs and bottle caps at these sites.
The All-Terrain Modes provide great depth,
accurate Target Identification and good
discrimination in the conditions that each
Search Mode is optimised for.
If in doubt in a new area or when first
detecting, try an All-Terrain Mode, or
All-Terrain General first.
General
Inland general purpose detecting. Excellent all round
performance for most targets and conditions.
Target Separation
Trash Rejection
Fast
Inland detecting optimised for separation of targets.
Coke rejection makes this mode suitable for sites of
ancient habitation.
Target Separation
Trash Rejection
Low Conductors
Inland detecting optimised for small or thin metal targets such
as hammered or cut coins and fine jewellery. Coke rejection
makes this mode suitable for sites of ancient habitation.
Target Separation
Trash Rejection
High Conductors
Inland detecting optimised for large or thick metal targets, such
as copper, gold, or silver coins. Special discrimination capabilities
make this mode ideal for highly conductive targets such as
coin stacks.
This is a high-powered Search Mode that will reduce battery
runtime by approximately one hour.
Target Separation
Trash Rejection
Trash Reject
Inland detecting optimised for maximum rejection of
iron trash and foil.
Target Separation
Trash Rejection
To Next Page
Loading...
