Mini-Cam CCU210
Switching the CCU Off
To switch the SOLOPro
+
off, press the Power ON/OFF button and a dialogue will
be displayed asking for confirmation to Power Off.
Press OK or the Carriage Return key and the unit will switch off in a controlled
fashion.
NOTE!
Under extreme circumstances, the unit may fail to turn off in this
fashion, in which case, press and hold the Power ON/OFF button .
for 10 seconds; when the power button is then released the unit ...
will turn off.
Environmental Operating Temperature Consideration
The operating temperature of the
SOLOPro
+
is between -10° to + 40°C, not in
direct sunlight.
Care should be taken during the operating of the CCU, especially in hot
environments, to shade it from direct sunlight. Radiant heat from the sun can
cause the equipment to heat up to temperatures exceeding + 60°C.
All computers generate their own heat on top of the ambient temperature
surrounding it.
NOTE !
Using the equipment in direct sunlight can cause the electronics
to overheat and shut-down unexpectedly. The equipment will
not turn on again until it has been allowed to cool down.
30
Version G
To Next Page
Loading...