Mini-Cam CCU210
Recorder Control Keys
This section describes the functions of the Recorder Control Keys and how
these can be used to make recordings and control the playback of stored surveys.
Making a recording
To start the recording of a survey.
Press the Record key
This will cause a recording to commence. The filename will be displayed at the
bottom left of
the screen together with an icon to show which memory type it
is being recorded
on. The elapsed time of the recording in minutes and seconds
is
displayed at the bottom right of the screen. A red dot to indicate that a
recording
is taking place is displayed at the right of the screen
At any time the Pause key
may be pressed which will pause the recording,
although the display will continue to show the live video and a Pause symbol
will be displayed, and flashes,
to show that the recording has been paused.
To resume the recording press either the Pause key
or the Record key .
To stop the recording, Press the Stop
key
. This will cause the record filename,
the recording elapsed time and the record button to be removed from the display,
and a pale blue rotating ‘progress’ circle
may appear on the right of the
picture to show that the file is being saved and closed.
NOTE! While the progress icon is displayed, no action, such as
removing a USB memory stick or an SD card, should be attempted
as it may result in corrupted or bad files.
Playing back a recording
To play back a recording, press the Gallery Browser key to select the .avi
or .mp4 file which you wish to view, then press
or press the Play Key
The selected video file will now start to play and the filename will be displayed at
the bottom left of the screen together with an icon to show which memory type
it was recorded on.
In the centre bottom of the screen, a progress bar is displayed to show the current
position in the total length of the recorded file. To the right of this is the total
41
Version G
To Next Page
Loading...