Mini-Cam CCU210
Un-mounting external memory
Before any external memory device (SD card or USB memory stick) is removed
from the unit, it must be un-mounted.
To do this open the Gallery Browser
and select the memory which needs to
be removed using the Up Arrow and Down Arrow keys. Press OK and select
the Remove option.
During the un-mounting process, the memory icon next to the fuel gauge will
show a downward pointing, green arrow with a red cross over it to show that
the memory should not be removed. For the SD memory and USB memory
the icons will look like this:
When it is safe to remove the selected memory, the red cross will disappear so
only the green arrow will remain, indicating that the memory may be removed.
For the SD memory and USB memory the icons will look like this:-
CAUTION:
It is very important that external memory is un-mounted
before it is removed. If this is not done and the memory is simply
unplugged, then files on the memory device may become corrupted.
USB / SDHC Media Types
Due to variations in USB / SD Flash media technology, Mini-Cam cannot
guarantee that all types and sizes will function correctly. For USB we
recommend a read speed of a least 15MB/s and a write speed of a
least 8MB/s. For SDHC we recommend a card of CLASS 5 or
higher. Therefore it is recommended that they are purchased directly
from Mini-Cam. Please contact us for further information.
Contact details can be found on page 3
52
Version G
To Next Page
Loading...