Mini-Cam CCU210
Create a New Observation
n When you come to a point in your survey where you need to create a
New Observation press
which will automatically pause the recording
and show a Control Menu. Now you can either enter the Defect Code
if you know it, or press to
select Survey Code Lookup which will give
you a selection of Defect Category Folders to explore, then highlight the
relevant Defect Code and press
. Once you have entered or selected
your Defect Code you fill in the information it asks for. Then press
to store the New Observation with no photo or press
to store
with a photo.
n Now you can continue your Survey. The system will automatically resume
recording, and after a couple of seconds the observational text will disappear
from the live picture.
NOTE!
If you move the camera before auto recording resumes you may
notice a slight jump in the video playback!
n Repeat these steps each time you wish to capture a new observation.
93
Version G
To Next Page
Loading...