INSTALLING AND REMOVING A MEMORY CARD
An SD (Secure Digital) Memory card or MultiMediaCard must be inserted for the camera to operate.
Always turn off the camera and confirm that the orange indicator lamp is
not lit before changing the memory card, otherwise the card may be
damaged, and data lost.
Every memory card including the supplied card must be reformatted with
this camera model before use (p. 20).
Open the battery-chamber door (1).
Insert the memory card all the way into the card slot and then
release (2). The card should catch in the slot.
Insert the card so the face is toward the front of the camera.
Always push the card in straight, never at an angle. Never force
the card. If the card does not fit, check that it is orientated cor-
rectly.
To eject a memory card, press the card into the slot and release
(3). The card can now be pulled out.
Close the battery-chamber door and slide it toward the body to
engage the safety catch (4).
15
1
2
3
3
4
To Next Page
Loading...
Need help?
General
