68 SETUP MODE
RESET SETTINGS
This function affects all modes. When selected, a confirmation screen will
appear; choosing “YES” resets to the default settings, “N0” cancels the
operation. The following settings will not change: clock/ language/ TV sys-
tem.
If file number reset is selected, when a new memory card is installed, the
first file stored in the card will be 0001. If the file number reset is disabled,
and the card is changed, the first file saved to the new card will have a
number one greater than the last file saved on the previous card if the
new card does not contain an image with a greater file number. If it does,
the file number of the new image will be one greater than the greatest on
the card.
FILE NUMBER RESET
The brightness of the LCD monitor can be adjusted. Use the left/right
keys of the controller (1) to adjust the brightness, the monitor image will
change accordingly. Press the central button of the controller (2) to set the
brightness level.
LCD BRIGHTNESS
FILE NO. RESET
OFF
ON
RESET SETTINGS
NO
YES
LCD BRIGHTNESS
ADJUST
+2
1
2
To Next Page
Loading...
Need help?
General
