Exposure compensation can also be adjusted with the left/right keys of
the controller (1). Press the central button to set (2).
The exposure compensation must be set before the image is captured.
To set the exposure compensation, the monitor must be on. When you
highlight the exposure compensation option, the exposure compensa-
tion bar appears. Adjust with the left/right keys of the controller. Press
the central button to set.The change in exposure is visible in the moni-
tor image. When set to any value other than 0.0, the value will remain
on the LCD monitor and the green indicator lamp next to the viewfinder
will blink as a warning.
46 RECORDING MODE
EXPOSURE COMPENSATION
The camera exposure can be adjusted to make the final picture lighter or darker by as much
as ±1.8Ev in 0.3 increments with all recording modes. The exposure-compensation value will
remain in the recording mode you set until it has been reset.
100
100
Exposure compensation is canceled in the following cases; when the recording mode is changed/
when the camera is set to the playback mode/ when the camera is connected to the computer/ when
the power is turned off.
1
2
To Next Page
Loading...
Need help?
General
